"File" menu

• Open - Opens a data file for recoding the measurements of the oscilloscope, spectrum analyzer, recorder or logical analyzer (corresponding user-specified comments are integrated into such file). Upon opening the file you automatically go to the corresponding tab (operation mode) and all the parameters are set before data storage.
• Save data - Saves the measurement results, corresponding comments and current parameters of the selected operation mode (current selected tab) into a data file.
• Save as vector graphic - Saves the measurement results of the selected operation mode as vector graphic image in *.emf format (Enhanced Metafile).
• Save as bitmap - Saves the measurement results of the selected operation mode as bitmap image in *.bmp format (Windows Bitmap).
• Print preview - Opens the preview window of measurement results of the selected operation mode to be reviewed prior to printing.
• Print - Prints the measurement results of the selected operation mode.
• Exit - Exits from the USB Oscilloscope application.

"Edit" menu

• Copy as vector graphic - Allows copying the measurement results of the selected operation mode to Windows buffer as vector graphic in *.emf format (Enhanced Metafile).
• Copy as bitmap - Allows copying the measurement results of the selected operation mode to the Windows buffer as a bitmap in *.bmp format (Windows Bitmap).
• Clear - Clears the measurement results of the selected operation mode.
• Comments - Opens the comment input window to be appended to the saved measurement results of the selected operation mode. Comments text is integrated into the measurement results file. Maximum comment size totals 64K for Windows 98/ME, however for Windows 2000/XP it is limited by the maximum file size.

"Analog signals" menu

• A/B channel smoothing - Submenu that allows determining the smoothing level of signal shape and noise reduction (only when operating in the oscilloscope mode).
• Calc parameters - Submenu that allows selecting the calculation of common signal parameters (DC and AC voltage and frequency component). Parameters may be calculated before processing (smoothing and filtering) then the real parameters of signal and processing will be calculated. Parameter calculation upon processing may be useful, if, e.g. it is necessary to determine the parameters of each dual-tone spectral component (DTMF) and for this purpose it is first necessary to filter one component and measure its parameters and then to filter the next component and measure its parameters as well.
• Processing - Submenu that allows selecting the different variants of measurement results mathematical processing (inverse, sum, difference)
• Sounds - Opens the event and sound settings window. Allows user-settable sounds to coirrewspond to psecific signal events. This window may be useful when searching, e.g. voltage 3.3 V to avoid constant jumping from the device on test to the monitor screen. You can set sounds to inform that voltage in the selected channel is near 3.3 V.

"Logic analyzer" menu

• Concatenation mode - on/off concatenation mode of logical analyzer charts.
• Keep the output levels - on/off keep mode of generator outputs in last state. If this mode is off then the output level changes in accordance with the set timing chart only within measurement (generation), i.e., upon pressing the "Run" button and till releasing it (when the button changes color from red to green once again), upon measuring all outputs go to the third level. If the mode keep the output levels is on then upon measuring the output level will correspond to the last value of timing chart. Outputs automatically go to the third level if Keep mode is off or generator button is released. This mode is to eliminate the undesirable signal suppression (variation) if the corresponding generator channels have not been accidentally disconnected from any elements of device on test.
• Markers select - this item of menu allows selecting the generator data portion in the table, at that the portion limits are determined by the marker position, i.e. they are positioned between them.
• Statistics - opens the statistics window.
• Always on-top - enables or disables the statistics window position on top of the program. As the statistics window occupies sufficiently large part of the work window then as necessary it may be hidden but at the same time, e.g., in concatenation mode when calculating the number of sync pulses it is conveniently to position the statistics window on top to avoid constant opening.
• UART, SPI, I2C, 1-Wire - open the corresponding interface analysis and decoding windows.
• Terminal - opens the terminal window - hardware support (input/output) of the analyzing interface.

"Service" menu

• Options - opens the operation mode settings window.
• Color - allows the user to specify color of the work area, channels and scale. These colors are also used if an image is saved.
• Open options - opens an application options file.
• Save options - saves the application options in the file.
• Language - submenu of this item allows selecting the available interface languages.

"Upgrade" menu

This item of menu opens the device software (firmware) upgrade window as well as indicates version and release date of the firmware.

"Help" menu

• Help - opens the help window (file).
• About program - opens the program information window,where you can see the version info, etc.