FREE Shipping! Buy Now - $169.50
May be.
But if you spend $3,000.00 for a 3 GHz digital oscilloscope
you can get the rest of your hobby laboratory for the such low price.

Also 200 KHz is enough for the most of hobby projects.
Home | Help | Buy Now | License | Download | About | Links
USB Oscilloscope

PC USB Oscilloscope is a great tool for your microcontroller projects!

Simply connect the device to the computer USB port, run the Windows application and you can analyze the UART, SPI, I2C and 1-Wire interface signals.

In the same box you get Oscilloscope, Logic analyzer, Spectrum analyzer, Recorder and Logic generator with a lot of potentialities for the affordable price!
Features
USB oscilloscope provides the following operation modes:
  • 2-channel oscilloscope (marker measurements, triggering (absolute, differential, external) and adjustable pretrigger, signal voltage and frequency measurement, filtering, etc.).
  • 2-channel spectrum analyzer (marker measurements, klirr-factor measurement, different window functions, filtering, etc.).
  • 2-channel recorder (marker measurements, option to add 99 markers with comments, maximal, minimal and average voltage measurement for each channel, waveform record within several tens of hours, etc.).
  • 16 (8)-channel logic analyzer (marker measurements, triggering (edge, level, mask) and adjustable pretrigger, external clocking (triggering), preset pulse miss, preset bit sequence/edge, decoding of the interface UART, SPI, I2C, 1-Wire, etc.).
  • 8-channel logic generator (tabular waveform formatting or direct timing chart plotting with mouse on the screen, etc.).
Technical parameters
Logic analyzer: 
- number of channels16 (8 if logic generator is on)
- sample rate1 KHz … 8 MHz
- memory depth 
      buffer reading (Fs=4-8 mHz):128 bit/channel
      buffer reading (Fs=2-2.66 mHz):1160 bit/channel
      buffer reading (Fs<=1 mHz):1544 bit/channel
      buffer reading in concatenation mode:1 Mbit/channel
      pipe reading (Fs < 500KHz):4K to 256M bit/channel
- input voltage0 … +5 V (available surge voltage protection)
- triggeringfor edges, mask, miss pulses, external clocking
- clockinginternal / external
- maximum input/output current10 mA
  
Oscilloscope, spectrum analyzer:  
- number of channels2
- sample rate100 Hz … 200 KHz
- memory depth 
      buffer reading: 1126 sample/channel (1 channel), 563 sample/channel (2 channels)
      pipe reading:64K sample/channel (1 or 2 channels)
- input voltage-20 … +20 V (hardware 2 sub-band)
- input impedance1 MOm
- ADC capacity10 bits
- triggering absolute (for rising/falling edge),
differential (for difference between adjacent samples),
external (for rising/falling edge of TTL levels)
- window functionsHamming, Hanning, Blackman, Blackman-Harris
  
Logic generator: 
- number of channels8
- sample rate1 KHz … 1 MHz
- memory depth1544 bit/channel
- output voltage"0" - 0 V, "1" - 3.3 V
- maximum input/output current10 mA
  
Recorder: 
- sample rate0.01 Hz … 200 KHz
- maximum record time24 hours at Fs < 100 Hz
- input voltage-20 … +20 V (hardware 2 sub-band)
- ADC capacity10 bit
  
Screen shots
Oscilloscope:
Logic analyzer / generator:
Spectrum analyzer:
SPI:
I2C:
UART:
1-Wire:
Additional Features
In addition, USB oscilloscope ensures as follows:
  • Add the comments to each measurement (to be recorded in the file with measurement results)
  • Save all the measurement results as vector graphic or bitmap for subsequent import to other programs or in the data file for subsequent analysis.
  • Print all the measurement results.
  • Copy all the measurement results to the buffer.
  • Set the events and sounds.
  • Calculate the different digital filters and perform the analog filtering.
  • Perform the oscilloscope timing chart smoothing.
  • Display the statistics for all the channels of logic analyzer and generator.
  • Upgrade the device firmware with USB bus that allows supplementing the device features with any functions to order.
* Supported operation systems: Windows 2000/XP/2003. Windows Vista - comming soon!
  
Shipping Information
  • Accessories: The package includes: USB Oscilloscope, Setup CD, 2 analog cables, 2 digital cables, and 1 USB cable.
  • Shipping and handling:
    • Handling is FREE for you! You pay only for shipping.
    • Optional Insurance is available.
      • Please provide your phone number if you need to ship to Canada.
  • Payment:
    • Our Pay Pal ID is mail@hobbylab.us
    • Paying by Pay Pal speeds up the shipping process. It allows us to process your order immediately.
    • We also accept money orders.
  • Return Policy:
    • We are proud to offer you our 30 day money back guarantee on the product that we sell as long as it is returned in good condition.
    • If there are any problems with your shipment please notify us immediately. Our goal is to have you as a satisfied customer.
    • We reserve the right to ask you the buyer to pay for all outward shipping fees and the return shipping fees.
  • Contact: If you have any questions feel free to ask by e-mail mail@hobbylab.us
Buy Now - $169.50
Copyright © HobbyLab, LLC