| Model |
SDS6062 |
SDS7072 |
SDS7102 |
SDS8102 |
SDS7202 |
SDS8202 |
SDS8302 |
SDS9302 |
| Bandwidth |
60MHz |
70MHZ |
100MHZ |
200MHZ |
300MHZ |
| Sample Rate |
500MS/s |
1GSa/s |
2GSa/s |
1GSa/s |
2GSa/s |
2.5GSa/s |
3GSa/s |
| Horizontal Scale (s/div) |
5ns/div~100s/div, step by 1~2~5 |
2ns/div~100s/div, step by 1~2~5 |
1ns/div~100s/div, step by 1~2~5 |
| Rise Time |
≤5.8ns |
≤5ns |
≤3.5ns |
≤1.7ns |
≤1.17ns |
| Display |
8" color LCD, 800 x 600 pixels, 65535 colors |
| Channel |
2+1 (external) |
| Record Length |
max 10M |
| Input Coupling |
DC, AC and GND |
| Input Impedance |
1MΩ ± 2%, in parallel with 10pF ± 5pF |
| Channel Isolation |
50Hz : 100 : 1, 10MHz : 40 : 1 |
| Max Input Voltage |
400V (PK - PK) (DC+AC, PK - PK) |
| DC Gain Accuracy |
±3% |
| DC Accuracy (average) |
Average ≥16:±(3% reading + 0.05 div) for dV |
| Probe Attenuation Factor |
1X, 10X, 100X, 1000X |
| LF Respond (AC, -3dB) |
≥10Hz (at input, AC coupling, -3dB) |
| Sample Rate / Relay Time Accuracy |
±100ppm |
| Interpolation |
sin (x) / x |
| Interval (△T) Accuracy (full bandwidth) |
Single : ±(1 interval time + 100ppm x reading + 0.6ns), Average>16 : ±(1 interval time + 100ppm ? reading + 0.4ns) |
| Vertical Resolution (A/D) |
8 bits resolution (2 Channels simultaneously) |
| Vertical Sensitivity |
2mV/div~10V/div |
| Trigger Type |
Edge, Pulse, Video, Slope, Alternate |
| Trigger Mode |
Auto, Normal, Single |
| Trigger Level |
±6 divisions from screen center |
| TAcquisition modes |
Sample, Peak Detect, and Average |
| Line / Field Frequency (video) |
NTSC, PAL, and SECAM standard |
| Cursor Measurement |
△V, and △T between cursors |
| Automatic Measurement |
Vpp, Vavg, Vamp, Vrms, Freq, Period, Vmax, Vmin, Vtop, Vbase, Overshoot, Preshoot, Rise Time, Fall Time, Delay A→B↑, Delay A→B↓, +Width, -Width, +Duty, -Duty |
| Waveform Math |
＋, －, ×, ÷, FFT |
| Waveform Storage |
15 waveforms |
| Lissajous Figure |
Bandwidth |
Full bandwidth |
| Phase Difference |
±3 degrees |
| Communication Interface |
USB, USB flash disk storage, Pass / Fail, LAN, VGA (optional), or COM (optional) |
| Cymometer |
available |
| Power Supply |
100V - 240V AC, 50/60Hz, CAT II |
| Power Consumption |
< 24W |
| Fuse |
2A, T class, 250V |
| Battery (optional) |
7.4V, 8000mA |
| Dimension (WxHxD) |
340 x 155 x 70 (mm) |
| Weight (without package) |
1.80 kg |
